1.
芯模振動高度機械化、自動化生產，生產效率高，勞動力占用少;
2.產量不受模型數量限制;
3.一種規格產品使用一套模型生產，產品尺寸精度極高;
4.采用干硬性混凝土，膠凝材料使用量少，成本降低;
5.干硬性混凝土、高頻振動成型，混凝土不發生分層離析作用，管體混凝土強度高、勻質性好;
6.成型后，即時脫模，模型數量少，極大地降低了模型投入使用費用;
7.采用自然或低溫(30-40℃) 蒸汽養護方法，節約能源;
8.可成型帶底座及非圓形鋼筋混凝土管;
9.生產環境改善，操作勞動強度低，文明生產;
10.可生產內壁嵌合腐蝕塑料薄膜管，工藝簡單;
11.工序少，工藝生產線斷、輔助吊運設備減少;
12.不產生廢水泥漿，工業廢渣少。
- Highly mechanized,automated product ion,highproduction efficiency, and low labor force occupancy;
- Production is not limited by the number of models;
- A specification product is produced using a set ofmodels with extremely high product size accuracy;
- Using dry hard concrete, the use of cementing materials 1S Smal I and the COst 1S reduced;
- Dry hard concrete, high-frequency vibrat ion molding,concrete does not have stratificat ionsegregat 1on,tube ConCretestrength1Shigh,homogeneity is good;
- After molding, the number of models is small, whichgreatly reduces the cost of putting the model into use;
- Adopt natural or low- temperature(30-40℃) steamConservation methods to save energy ;
- Formable belt base and non-circular reinforcedconcrete pipe;
- Improved production environment,loW operatinglabor intensity, civilized production;
- Can produce inner wall embedded corrosion plasticthin film tube, the process is simple;
- There are few processes, process production
- No waste water mud is produced, and there is littleindustrial waste.
